Guy Hudson – Water Dowser

Guy Hudson – Water Dowser.

This article appeared in the Telegraph.

Guy_Hudson_Water_Dowser

Guy_Hudson_Water_Dowser

At Beneficial Environments Guy Hudson runs regular water dowsing courses.

The next water dowsing course is coming up soon.

 

Electric and Magnetic Power Frequencies Meter

In this video Guy Hudson talks about the Electric and Magnetic Power Frequencies Meter.

The PF5 is EMFields newest power-frequencies detector. The PF5 measures electric and magnetic EMFs from house wiring, including those from appliances at home at at work. The PF5, unlike most EMF meters on the market, also measures frequencies in the range from 20 Hz to well over 50 kHz. This enables the PF5 to measure the higher frequency electric and magnetic fields emitted by induction cooking hobs, solar-panel inverters, ‘energy-saving’ compact fluorescent (CFL) lamps and some LED lights.

These are amongst the most concerning new sources of our electromagnetic field exposures as the currents they induce in your body are proportional to the frequency. So a magnetic field at 25000 Hz (25 kHz) will induce 500 times more current in your body compared with same strength of field at 50 Hz. Induction hobs, in particular, induce some of the highest internal electric currents in your body in the VLF frequency range. Such currents have been shown to significantly affect the nervous system.

The PF5 is an easy to use, pocket sized, accurate, power-frequencies meter which is ideal for carrying around. It measures both electric and magnetic fields and is available labelled in either international microtesla (µT) units or in milliGauss (mG) units for America, Canada and Australia etc.

The Electric and Magnetic Power Frequencies Meter is available here

RadAware Meter

In this video Guy Hudson talks about the RadAware Meter.

Our new personal microwave exposure alarm.

Get an early warning of when you are being exposed (you will be surprised how often you are!)

It is thousands of times more sensitive than other microwave RF alarms on the market and detects over more than twice the frequency range, including those currently planned for 5G.

At its most sensitive it can detect peak exposures less than 0.01 V/m (0.25 µW/m^2)

Three LED alarm-level light indicators plus

Alarm sounds indicate six different alarm levels that increase in the ratio of:

x1  x1.5;      x2.5  x4;     x6  x10-fold

The RadAware meter is available here

Acousticom 2 High Frequency Meter

In this video Guy Hudson talks about the Acousticom 2 High Frequency Meter.

Why Buy?

This meter is a core part of equipment for anyone interested in Electrosensitivity and low electrosmog environments. It allows people to investigate the levels and sources of electrosmog in the most simple way and direct way. For what it does it is very good value for money. Not the quite cheapest meter on the market but the best for the money.

Technical Description from the Manufacturer

The Acousticom 2 is our newest microwave detector. It presents RF measurements as an audio signal, with LEDs and an alarm at high levels of RF (you can also switch the sound off if you prefer to be less obvious when taking readings). With simple controls, easy to read results, but still using the same advanced microwave detector as our Acoustimeter, this instrument is perfect for those on a budget. It is smaller and lighter than the Acoustimeter, and comes in its own carry pouch.

The Acousticom 2 was designed using the experience gained from many years of practical RF and microwave measurements. The advanced RF detector is the same as that used in the Acoustimeter. LED lights display the peak levels of microwave electromagnetic fields from 200 MHz up to over 8000 MHz (8 GHz), covering the frequencies used by most modern communication systems encountered in our everyday environment. This includes TETRA, all mobile phone systems including 4G/LTE, Smart Meters, and all WiFi and WiMax frequencies. The LEDs update rapidly, and allow you to quickly gauge the levels in an area and find any hot-spots. Its readout is sensitive to 0.01 V/m. When two LEDs are both lit next to each other, the exposure level is halfway between the two. This is only for levels above 0.1 V/m, e.g. when both 0.10 and 0.30 V/m are lit, the level is about 0.20 V/m (halfway between).

The Acousticom 2 High Frequency Meter is available to buy here

Electromagnetic Fields and Health

Two hundred and thirty four scientists from 41 nations have signed the International EMF Scientist Appeal.
All have published peer-reviewed research on Electromagnetic Fields and Health or Biology.

The International EMF Scientist Appeal serves as a credible and influential voice from EMF scientists who are urgently calling upon the United Nations and its sub-organizations, the WHO and UNEP, and all U.N. Member States, for greater health protection on EMF exposure.

The appeal was developed by a committee of the following scientists:

Martin Blank, Ph.D., Columbia University, USA

Magda Havas, Ph.D., Trent University, Canada

Elizabeth Kelley, MA, Director, EMFscientist.org

Henry Lai, Ph.D., University of Washington, USA

Joel M. Moskowitz, Ph.D., University of California, Berkeley, USA

Twenty-one of the 234 scientists have provided quotes which can be viewed here.

Dr George Carlo

Dr George Carlo is a speaker at a special screening of Generation Zapped in East Sussex.

Generation Zapped is a new documentary about the health risks of wireless technology.

A screening of this documentary and a workshop conference has been organised in the UK.

CONFERENCE & SCREENING

Date: Friday, 6th October 2017
Time: 10am – 5pm
Tickets include buffet lunch and refreshments: £50
https://billetto.co.uk/e/generation-zapped-screeningwith-dr-george-carlo-tickets-219394/select
Location: Dale Hill Hotel & Conference Centre, Ticehurst, TN5 7DQ (close to A21, Flimwell Lights)
RSVP/QUERIES: Sarah Dacre zapped.igen@gmail.com

BONUS SCREENING

Date: Thursday, 5th October 2017
Time: 6pm – 7.30pm
Donations to cover costs will be appreciated. 

“GENERATION ZAPPED investigates the potential dangers of prolonged exposure to Radio Frequencies (RF) from wireless technology; its effects on our health and well-being, as well as the health and development of our children. From its links to breast and brain cancer, to its associations with increased infertility and genetic mutations related to autism and ADHD, to newly developed illnesses, such as Electrical Hyper-Sensitivity (EHS).”

A new film produced in the USA and lasts 70 minutes.

Dr George Carlo is a public health scientist, epidemiologist, lawyer, and the founder of the Science and Public Policy Institute. Dr George Carlo headed a $28.5 million research program funded by the cell phone industry from 1993 to 1999. He has appeared on 20/20, 60 Minutes, World News Tonight, CBS News with Dan Rather and The Today’s Show, as well as on CNN, Fox News, and MSNBC.

He is the former head of Cellular Telephone Industry Association (CTIA) with a budget of $25million established concerns about cell phone use.  Author of Cell Phones: Hidden Hazards in the Wireless Age, available on Amazon.

Dr George Carlo Generation Zapped

Dr George Carlo Generation Zapped

Guy Hudson & Beneficial Environments have a stand at the screening and conference.

Guy can advise you on how to protect yourself from everyday electrosmog.

Please drop by and say hello!

About Guy Hudson BSc MInstP

Guy is a physicist, engineer, EMF Audit & Surveying Professional & former CIO.
He is electrosensitive.
He is the CEO of Beneficial Environments.
Co-founder of Village Water.
Previously management consultant to telecoms industry.

electromagnetics_and_wellbeing_

Guy Hudson BSc MInstP

 

Modem Router Bag – why use one and how it works

How to block WIfi

How to block Wifi

Our modem router bag – a shielding bag that goes over a router and ties tightly to reliably stop wifi microwaves leaking out.

Keep using the internet but without wifi radiation. It consists a simple bag with a drawstring to tighten around the cables connected to the modem router. It is made of a tough durable cotton and stainless steel filament mix material which reflects wifi signals – stopping them getting out of the bag. This simply and reliably allows the modem to cool but keep working with the ethernet wired broadband.

How do modems work? Modem routers take broadband signals from a landline and convert them to ethernet (wired cables) and wifi. The bag stops the wifi part radiating you while keeping the wired cables working.

A key part of electrosmog reduction is to avoid, or at least reduce exposure to wifi when you can, especially from your own modem router which is the one closest to you and hence usually giving you the strongest exposure.

Often you can switch the wifi signal off on your modem router.

Occasionally – there is a simple on/off button for wifi only no problem. These are rare and also not supplied by your broadband supplier – so if anything goes wrong they can’t help and also it may not optimize and give you the best data speeds. So if you choose to use one supplied by your broadband supplier normally you will have to log in and set the wifi off. There are 2 problems with this – some BT homehubs continue to radiate wifi signals even when wifi is set to off. Also many modems reset when the provider loads new software – needed for security and reliability – and it is not unknown for the wifi signal to restart. So the modem bag provides a quick and simple fix.

Sent from a wired computer.

Dr Mercola and Electrosmog

Preaching to the unconverted?

My blogs are mainly read by those who understand about the effects of everyday electromagnetic fields. So the point is how to convince those who are or will be affected by use of technology.

Mercola is probably the leading internet doctor and is very convincing. He is very well qualified.

So I recommend you to share this blog and video to all your friends, family and work colleagues that would benefit.

Dr Mercola and Electrosmog.

Great Video to convert all those who aren’t convinced about problems with health and electromagnetic radiation.

However!! I think his way of showing that radiation strength goes down with distance (“Distance is your friend”) is impractical. He uses a selfie stick and speaker mode can only be used in private.

A much better solution are airtube headsets which keep the radiation away from your head and can be used in almost any situation like a normal earpiece headset.

“Low Radiation” Cordless DECT Phones – How to stop them radiating has changed

“Low Radiation” Cordless DECT Phones – How to stop them radiating has changed, radically.
Summary:
1) tick “no radiation” ECO setting
2) take all the handsets out of their charging cradles, switch them off, and do not replace them in the cradles.
3) if all of the above is not done – the transmitter will radiate
4) if a call comes in, switch a handset on and the system will reconnect the transmitter
Radiation from cordless phones is a major contributor to electrosmog levels*. To have the transmitter base on 24/7 (the default – cost £25/$30 a year)
One manufacturer, GIGASET  alone has a “no radiation” setting – here is how you make that work. (It has changed – radically and if you haven’t checked with a meter, you may be in for a surpise. It does not operate how you might expect it to.
We have been recommending Siemens Cordless phones for those customers who cannot be without Cordless phones but want low radiation when not using them. The way to cut the radiation from the system them has changed.
Siemens have sold their Cordless phone division. The phones are now called GIGASET instead of Siemans GIGASET.
The GIGASET phones’ low radiation function works radically differently for all their DECT phones**.
Detail Instructions
1 Set up
a) As per normal – connect the base to the landline, and connect the charger
b) position handsets around your house in their charging cradles and switch on with the green button
c) on any handset go into settings/Eco and select “No radiation” and make sure it is ticked.
2) Operation
When you want no radiation especially at night –
a) remove each and all of handsets from each of the cradles
b) switch each of them off with the red button. (Beware if you replace any the handsets in any cradle they switch on and activate the base transmitter again)
c) this will deactivate the base transmitter and it will not ring if a call comes in.
d) will record incoming messages for later replay.
e) If you also connect a wired handset it will ring until the call recorder cuts in.
f) If, when a call comes in, in the night if you pick up any handset and hit the green button it will switch on the handset which will switch the transmitter on.
Our comments
Once you know this it is not such a bad system. It’s a shame you can’t charge the handsets without them being on, and it’s a shame that incoming calls won’t wake up the transmitter and the handsets. This means the transmitter needs to be on whenever you want the handsets to ring on an incoming call – unless – if you can hear the ringing from the wired handset (or ringer unit)  anywhere where you need to  in the house then have the transmitter switched off during the day, too. Because all you do on hearing a ringing is to pick up any handset and switch it on. (follow instructions 1a and 1b, above). If you make sure the batteries are good (rechargeable AAA) then occasionally recharge them in the cradles when you are out  – all at the same time and then uncradle them all again.
This was tested on the current GIGASET models 430 and 430A as at July 2017 and confirmed with GIGASET customer helpdesk.
**[probably apart from their most expensive range which they still call ECODECT Plus.]
Please do comment on this and any other makes of DECT phones that may have an ECO mode. We have yet to find out whether the variable transmitter power function still operates and what the “full range” setting does.
Beneficial Environments is committed to minimising electrosmog for the health conscious in our technological surroundings.

WiFi Refugees

Wi-Fi Refugees. Electrosensitive people try to escape wireless technology.

This film about people in the US with electrosensitivity and how it affects their lives. It is a good introduction for those who have not yet understood or seen the severe human cost of the problem to those affected by electrosmog and treats the electrosensitivity sufferers with respect and dignity.

However, the solutions shown in this film are not anywhere near as effective as used by others. This means that individuals with Electrosensitivity can have more expectation that they will get better as there are more and more documented cases of people getting their lives back together and better techniques for electromog reduction and also improved modalities for improving the body’s response to the pollution.

Consultancies like Beneficial Environments to create low electrosmog environments to allow electrosensitive clients to live in cities and countryside with minimum inconvenience and so that their most important environments, where they spend significant times are well below their sensitivity trigger levels and so that they can heal and reduce their symptoms and get a fuller life back. Guy Hudson the CEO of Beneficial Environments has reduced his sensitivity and now leads a very full life helping others.

Just one example from the film: shielding a room right round with reflective shielding causes mutliple internal reflections which affect electrosensitive people, also connecting the shielding and earthing it in a band around the room cause an induction loop for mains frequencies. So with a bit of extra knowledge people’s electrosmog levels may be reduced greatly. (The solution in this case:- use non-reflecting shielding and design out induction loops)

To understand what Beneficial Environments can do for you Download our ebook (fill out the form on the right hand side) and look at the items in the webshop – they are things we use ourselves.

Guy Hudson